IMST Light Gateway - Raspberry iC880A-SPI

johkol · 12. Dezember 2019 um 20:08

Hallo Leute! Bin stolzer Besitzer eines IMST - Raspberry iC880A - Gateways. https://wireless-solutions.de/products/long-range-radio/lora-lite-gateway.html

Möchte gerne dieses Gatway als open IOT TTN Gateway in St. Pölten hochfahren. Ich schaffe das nicht schnell genug. Kann mir bitte wer bei der Konfiguration behilflich sein?
/lg Johannes

markusk · 13. Dezember 2019 um 00:08

das Video hilft nicht?

stefan · 13. Dezember 2019 um 09:00

Hallo,

es gibt auch auf github eine Scriptsammlung, mit vorbereiteten Scripts, die von einem „nackten“ Image aus durch die Konfiguration führt:

Ich hoffe, das hilft!

LgS

bernhard · 21. Dezember 2019 um 11:27

Vielleicht darf ich ergänzen - hier die Doku:

github.com

OpenIotNetwork/ic880a-setup-scripts/blob/master/README.md

# OpenIoT Gateway Installation Scripts

## Purpose ##
The purpose of this project is to support the installation of ic880a based Raspberry Pi TTN gateways for the community OpenIoT.

This has been done for:
* OpenIoT community - https://openiot.network
* TTN Vienna - https://www.thethingsnetwork.org/community/vienna/

## Credits & Thanks to... ##
Thanks to:
* TTN Zurich - They did a great job with their gateway setup tutorial and installation script. As a matter of fact a lot has been copied from their routines. This has two reasons: they did a really great job and we would like to have our gateways being set up from the same baseline.
* PiVPN - They have the best setup routine I've seen so far. Therefore I learned a lot and also copied some code from these guys.

# Documentation #
This documentation should lead you through the installation and setup of your IMST ic880a Raspberry Pi LoRaWAN Gateway.

We created some videos that walk you through the whole procedures (no sound).

Link | Content of the video

This file has been truncated. show original

Videos auf youtube:

Link	Content of the video
https://youtu.be/Z9vN4JBwPyc	Prepare SD card and copy installation scripts to your SD card.
https://youtu.be/JZEnr5Lz1-A	Complete installation procedure Part1 (parts that have to be done on the console)
https://youtu.be/-a2BNTK87_0	Complete installation procedure Part2 (after the raspery pi been connected to the network)